浙江省领海基点海岛现状监测和分析          下载免费PDF全文

陈冲  康波  蒋婵娟  张佳期  徐开达 《海洋开发与管理》2020,37(8):7-12

为及时掌握领海基点及其标志建设、领海基点海岛开发利用以及领海基点海岛周边海域生态环境等状况，文章采用卫星影像、无人机航摄和现场巡查相结合的监测方式，对浙江省领海基点海岛标志、地形地物、植被、地质灾害、人类活动、开发利用状况和周边海域生态环境进行监测和分析。研究结果表明：浙江省领海基点海岛保护状况总体较好，周边海域海水符合第一类和第二类海水水质标准，地形地貌无明显变化；部分领海基点海岛出现海蚀崖、海蚀沟和岩体裂缝并有海钓活动痕迹，部分领海基点方位点标志碑由于风暴浪的冲击存在局部损毁的现象。后续应对损毁领海基点方位点标志碑开展整修和维护工作；对已发生和可能发生的崩塌和滑坡等地质灾害进行常态化监测；在掌握海岛生态系统现状的基础上建立评估机制，开展海岛生态系统健康评估；积极与利益相关部门开展联系和沟通，形成领海基点海岛保护协调制度；进一步加强对领海基点海岛保护的宣传工作。  相似文献   

海南典型热带海草床4种代表性鱼类的生长特征及其对海草资源量变化的响应     

陈启明  刘松林  张弛  崔黎军  江志坚  吴云超  黄小平 《热带海洋学报》2020,39(5):62-70

文章以海南岛新村湾、黎安港和潭门港海草床为研究区域, 选取褐篮子鱼(Siganus fuscessens)、点斑篮子鱼(Siganus guttatus)、四带牙鯻(Pelates quadrilineatus)和细鳞鯻(Terapon jarbua) 4种代表性鱼类为研究对象, 分析其体长与体质量的关系, 并探讨4种鱼类对海草资源量变化的响应。结果表明, 除栖息于潭门港海草床的4种鱼为负异速生长, 其他区域海草床的鱼类均为正异速或等速生长; 4种鱼的体质量生长速率(即异速生长因子b)和肥满度呈现黎安港>新村湾>潭门港的趋势, 并与3个海草床的海草覆盖率、密度和生物量的变化趋势一致; 推测海草资源量下降可能增加鱼类的被捕食压力和减少食物来源, 从而导致生活于海草床的代表性鱼类生长速率下降。  相似文献   

ICESat-2激光卫星与光学遥感影像融合水深测量          下载免费PDF全文

曹彬才  方勇  江振治  高力  胡海彦 《海洋测绘》2020,40(5):21-25

针对浅海测深的数据特点和应用需求,以我国南海甘泉岛为例,研究了利用ICESat-2(Ice,Cloud,and Land Elevation Satellite-2)激光卫星数据和光学遥感影像开展主被动融合水深测量的方法。首先通过信号点提取、水面/水底识别、水下点折射改正等步骤处理ICESat-2数据,获得水深值,随后以激光点作为控制,计算光学水深反演模型参数,最后由点及面地获取大范围高精度水深。实验表明,甘泉岛区域主被动融合测深中误差优于1.30m,基于激光卫星数据的主被动融合测深方法能够为浅水水深测量提供新手段。  相似文献   

FY-4A卫星海域云图图像增强融合方法研究          下载免费PDF全文

尹锡帆  赵辉  孙文舟  郭晓明  蒋善伟  刘言志 《海洋测绘》2020,40(5):30-34

FY-4A卫星是我国目前最先进的气象卫星,为缓解光照对其可见光和红外云图影响,增强图像质量和显示细节,通过分析中央气象台发布的FY-4A卫星云图中可见光和红外云图资料,指出云图可见光和红外云图存在极强互补性的特征,提出一种基于灰度均值的自适应非线性Gamma图像增强融合方法。仿真实验结果指出利用本文方法得到的融合云图拥有显示云的更多细节和识别云层云类的特点。该方法有效性的验证,为21世纪海上丝绸之路气象预报保障提供了新的云图识别处理技术。  相似文献   

RESEARCH ON THE CHARACTERISTICS OF QUATERNARY ACTIVITIES OF SU-XI-CHANG FAULT          下载免费PDF全文

ZHANG Peng  ZHANG Yuan-yuan  XU Han-gang  LIU Jian-da  CHEN Jian-qiang  LI Li-mei  LI Jin-liang  GU Qin-ping  JIANG Xin 《地震地质》2019,41(5):1172-1184

Running across the urban areas of Changzhou, Wuxi and Suzhou, the NW-trending Su-Xi-Chang Fault is an important buried fault in Yangtze River Delta. In the respect of structural geomorphology, hilly landform is developed along the southwest side of the Su-Xi-Chang Fault, and a series of lakes and relatively low-lying depressions are developed on its northeast side, which is an important landform and neotectonic boundary line. The fault controlled the Jurassic and Cretaceous stratigraphic sedimentary and Cenozoic volcanic activities, and also has obvious control effects on the modern geomorphology and Quaternary stratigraphic distribution. Su-Xi-Chang Fault is one of the target faults of the project "Urban active fault exploration and seismic risk assessment in Changzhou City" and "Urban active fault exploration and seismic risk assessment in Suzhou City". Hidden in the ground with thick cover layer, few researches have been done on this fault in the past. The study on the activity characteristics and the latest activity era of the Su-Xi-Chang Fault is of great significance for the prevention and reduction of earthquake disaster losses caused by the destructive earthquakes to the cities of Changzhou, Wuxi and Suzhou. Based on shallow seismic exploration and drilling joint profiling method, Quaternary activities and distribution characteristics of the Su-Xi-Chang Fault are analyzed systematically. Shallow seismic exploration results show that the south branch of the Su-Xi-Chang Fault in Suzhou area is dominated by normal faulting, dipping to the north-east, with a dip angle of about 60° and a displacement of 3~5m on the bedrock surface. The north branch of the Su-Xi-Chang Fault in Changzhou area is dominated by normal faulting, dipping to the south, with a dip angle of about 55°~70° and a displacement of 4~12m on the bedrock surface. All breakpoints of Su-Xi-Chang Fault on the seismic exploration profiles show that only the bedrock surface was dislocated, not the interior strata of the Quaternary. On the drilling joint profile in the Dongqiao site of Suzhou, the latest activity of the south branch of Su-Xi-Chang Fault is manifested as reverse faulting, with maximum displacement of 2.9m in the upper part of Lower Pleistocene, and the Middle Pleistocene has not been dislocated by the fault. The fault acts as normal fault in the Pre-Quaternary strata, with a displacement of 3.7m in the Neogene stratum. On the drilling joint profile in the Chaoyang Road site of Changzhou, the latest activity of the north branch of Su-Xi-Chang Fault is manifested as reverse faulting too, with maximum displacement of 2.8m in the bottom layer of the Middle Pleistocene. The fault acts as normal fault in the Pre-Quaternary strata, with a displacement of 10.2m in the bedrock surface. Combining the above results, we conclude that the latest activity era of Su-Xi-Chang Fault is early Middle Pleistocene. The Su-Xi-Chang Fault was dominated by the sinistral normal faulting in the pre-Quaternary period, and turned into sinistral reverse faulting after the early Pleistocene, with displacement of about 3m in the Quaternary strata. The maximum magnitude of potential earthquake on the Su-Xi-Chang Fault is estimated to be 6.0.  相似文献   

APPLYING 3D INVERSION OF SINGLE-PROFILE MAGNETOTELLURIC DATA TO IDENTIFY THE SHADE AND YUNONGXI FAULTS          下载免费PDF全文

JIANG Feng  CHEN Xiao-bin  DONG Ze-yi  CUI Teng-fa  LIU Zhong-yin  WANG Pei-jie 《地震地质》2019,41(6):1444-1463

Many synthetic model studies suggested that the best way to obtain good 3D interpretation results is to distribute the MT sites at a 2D grid array with regular site spacing over the target area. However, MT 3D inversion was very difficult about 10 years ago. A lot of MT data were collected along one profile and then interpreted with 2D inversion. How to apply the state-of-the-art 3D inversion technique to interpret the accumulated mass MT profiles data is an important topic. Some studies on 3D inversion of measured MT profile data suggested that 2D inversions usually had higher resolution for the subsurface than 3D inversions. Meanwhile, they often made their interpretation based on 2D inversion results, and 3D inversion results were only used to evaluate whether the overall resistivity structures were correct. Some researchers thought that 3D inversions could not resolute the local structure well, while 2D inversion results could agree with the surface geologic features much well and interpret the geologic structures easily. But in the present paper, we find that the result of 3D inversion is better than that of 2D inversion in identifying the location of the two local faults, the Shade Fault(SDF)and the Yunongxi Fault(YNXF), and the deep structures. In this paper, we first studied the electrical structure of SDF and YNXF based on a measured magnetotelluric(MT) profile data. Besides, from the point of identifying active faults, we compared the capacity of identifying deep existing faults between 2D inversion models and 3D models with different inversion parameters. The results show that both 2D and 3D inversion of the single-profile data could obtain reasonable and reliable electrical structures on a regional scale. Combining 2D and 3D models, and according to our present data, we find that both SDF and YNXF probably have cut completely the high resistivity layer in the upper crust and extended to the high conductivity layer in the middle crust. In terms of the deep geometry of the faults, at the profile's location, the SDF dips nearly vertically or dips southeast with high dip angle, and the YNXF dips southeast at depth. In addition, according to the results from our measured MT profile, we find that the 3D inversion of single-profile MT data has the capacity of identifying the location and deep geometry of local faults under present computing ability. Finally, this research suggests that appropriate cell size and reasonable smoothing parameters are important factors for the 3D inversion of single-profile MT data, more specifically, too coarse meshes or too large smoothing parameters on horizontal direction of 3D inversion may result in low resolution of 3D inversions that cannot identify the structure of faults. While, for vertical mesh size and data error thresholds, they have limited effect on identifying shallow tectonics as long as their changes are within a reasonable range. 3D inversion results also indicate that, to some extent, adding tippers to the 3D inversion of a MT profile can improve the model's constraint on the deep geometry of the outcropped faults.  相似文献   

云南小江流域典型泥石流沟中底栖动物群落特征及其对河流地貌的响应   总被引：2，自引：2，他引：0  

朱朋辉  潘保柱  李志威  蒋小明  赵娜  赵耿楠  何浩然 《湖泊科学》2019,31(3):869-880

云南小江流域为典型干热河谷区，该区域干热少雨，流域内泥石流沟众多，生态环境十分脆弱.2017年4月和9月对小江流域的吊嘎河、蒋家沟、蓝泥坪沟、清水沟、陶家小河5条泥石流沟及小江干流开展了系统调查，旨在摸清5条泥石流沟及小江干流河流地貌、水环境及底栖动物群落现状，分析不同河床结构发育程度的泥石流沟间的底栖动物群落差异，揭示底栖动物对反映河床结构发育程度的河流地貌特征参数凹凸度的响应关系.调查期间于5条泥石流沟及小江干流中共采集到底栖动物70种，隶属于4门6纲38科69属，其中环节动物6种，软体动物2种，节肢动物61种，扁形动物1种.从种类类群来看，5条泥石流沟及小江干流的底栖动物物种数、密度、生物量上均以节肢动物占绝对优势，分别占总量的78.0%~92.5%、98.7%~100%、65.0%~100%.从功能摄食类群上来看，5条泥石流沟及小江干流底栖动物密度上均以直接收集者为主，占总量的74.3%~96.3%.回归分析表明，5条泥石流沟中底栖动物物种数、密度及生物量均与河流地貌特征参数凹凸度呈正相关关系，由此可见，发育良好的河床结构在维持河流地貌稳定和改善河流生态方面起着举足轻重的作用.本研究结果可为小江流域山区河流泥石流沟河床结构重建及生态修复提供科学依据.  相似文献   

基于经验模态分解和小波分解估算海气通量涡相关计算中的截断时间尺度     

姜浩  赵中阔  樊伟  宋金宝 《海洋与湖沼》2018,49(6):1138-1150

基于时长38天的海表风场实测数据,应用经验模态分解(EmpiricalModeDecomposition,EMD)和小波分解(Wavelet Decomposition, WD)这两种数据处理方法首先对涡相关法中的截断时间尺度(CutoffTimescale,CTS)进行估算,结果显示:基于EMD与WD方法估算出的CTS一般都在40秒左右(EMD的结果略小),远远小于传统涡相关法中CTS的取值(固定为10分钟),且EMD和WD的使用使得每一段数据都能够根据自身的湍流特点而获得合适的CTS; EMD方法和WD方法有效的去除了计算结果中的非湍部分,且对通量传输方向的刻画也更加合理,极大提高了通量的计算精度,所得通量与传统方法计算的通量偏差平均值高达45%;研究还对EMD和WD的优缺点进行了对比分析,结果表明EMD相比于WD有更高的自主性,而WD对信号的分离程度则更高。  相似文献   

Sensitive and rapid detection of two toxic microalgae Alexandrium by loop-mediated isothermal amplification     

ZHANG Fengying  SHI Yanhong  JIANG Keji  XU Zhaoli  MA Lingbo 《海洋学报(英文版)》2018,37(2):139-146

A loop-mediated isothermal amplification (LAMP) assay was designed and evaluated for rapid detection of the toxic microalgae Alexandrium catenella and A. minutum, which can produce paralytic shellfish poisoning (PSP). Two sets of four specific primers targeting these two species were derived from the sequence of internal transcribed spacer (ITS) of ribosomal DNA. The method worked well in less than an hour under isothermal conditions of 65℃. LAMP specificity was validated in closely related algae as a comparison, suggesting the strict specificity of the LAMP primers. Two visual inspection approaches were feasible to interpret the positive or negative results. The detection limits of A. catenella and A. minutum samples using the LAMP assay were found to be 5.6 and 4.5 pg DNA, respectively. The sensitivity of this LAMP assay was 10 or 100-fold higher than Polymerase Chain Reaction (PCR) method in detecting the two microalgae. These characteristics of species specificity, sensitivity, and rapidity suggest that this method has the potentiality in the monitoring of red tide caused by A. catenella and A. minutum.  相似文献   

两种造礁石珊瑚对海水酸化和溶解有机碳加富的响应*     

郭亚娟  周伟华  袁翔城  廖健祖  江雷  黄晖 《热带海洋学报》2018,37(1):57-63

文章选择鹿回头近岸海域常见的板叶角蜂巢珊瑚(Favites complanata)和十字牡丹珊瑚(Pavona decussata)为研究对象, 采用室内连续培养的方法, 探究两种不同造礁石珊瑚对酸化和溶解有机碳(DOC)加富的响应。结果表明: 酸化(pH 7.6)并不会影响两种珊瑚的钙化速率和生长速率; 但DOC加富(524.03±78.42μmol•L^-1)使两种珊瑚的钙化速率分别降低67%和47%、生长速率降低59%和40%。当二者共同作用时, 两种珊瑚的钙化速率降低30%和11%、生长速率降低46%和59%, 大多没有DOC单独作用时强烈, 表现出一定的拮抗作用。两种珊瑚共生虫黄藻叶绿素荧光指数(F_v/F_m)均升高后降低, 板叶角蜂巢珊瑚F_v/F_m最先降低。实验表明, 这两种珊瑚虽然对海洋酸化的敏感度不高, 但是对有机物加富有不同的响应, 板叶角蜂巢珊瑚更为敏感, 可能导致这两种珊瑚在未来环境变化中有不同命运。  相似文献